What Is the Tool Jewelers Use to Get the Back of a Watch Removed to Replace a Battery?

Download Commodity

Download Article

When you lot don't have the specialized tools to remove a picket backing, you may not know how to supercede a battery or fix a broken spotter. Just you don't demand to purchase expensive tools to pry off your lookout man's backing. In many cases, specific household items will do. Depending on your watch, you lot may be able to pry off the backing with something as uncomplicated as your thumbnail, a razor blade, a rubber ball, or a pair of scissors.

1. 1

   Try your thumbnail on inexpensive, simplistically-designed watches. Some watch backings tin can exist opened by prying a unproblematic hinge in the back open. Audit your sentinel to make up one's mind whether the backing will make this possible. If the bankroll has no screws, it can likely exist opened with your thumbnail.^[1]

   • This method will just work if your lookout man backing has no screws.
   • While y'all may be able to use other fingernails, your thumbnail is ordinarily the largest and strongest.

2. two

   Locate your sentry'due south hinge. On simple watches, the swivel will wait like a small indentation along the border of the lookout man's back. This is where yous will place your thumbnail to pry off the backing.

   • Do not set your watch down equally you work. Continue it in your other hand so you lot tin can maneuver information technology while prying information technology open up.

   Advertisement

3. 3

   Insert your thumbnail underneath the backing hinge and lift. Every bit you lot work, your nail should face the back of the watch. Lift slowly to avoid chipping or bending your thumbnail. With pressure and patience, the bankroll should pop off. If the backing does non easily come up off, avoid using your thumbnail and then you don't damage it.^[2]

   • This method is best done if y'all have long, good for you fingernails.

4. 4

   Apply a razor blade as an alternative. If the hinge is tight or your thumbnail is too curt to pry off the backing, a apartment razor blade tin piece of work as well. Place the razor blade's border in through the hinge opening and elevator until it is pried off.^[three]

   • If there is no indentation but a space betwixt the back and casing, y'all tin can use this method with a razor blade.
   • Minor kitchen knives tin piece of work in a compression if yous don't have a razor blade.

   Advertisement

1. 1

   Purchase a soft, mashable safe brawl. Rubber balls ofttimes have enough grip to pry off watch backings. Choose a rubberized brawl that is both squishy and tacky so it can latch onto your watch's dorsum.^[4]

   • Stress assurance can work as a cheaper culling.
   • Avert rubber balls fabricated from difficult materials. The ball needs to be soft and pliable and so it can grip the backing.
   • A super-cheap alternative is to reverse-wrap a new lawn tennis ball with duct tape until completely covered. The duct tape agglutinative is very sticky and the tennis brawl gives you lot something to grip onto.

2. 2

   Place the watch down on a apartment surface. Although y'all can hold the watch in your hand while you lot work, placing it on a flat surface will permit you to work more comfortably and efficiently. If your watch is expensive or fragile, fix a towel downwards for the sentinel to residue on while y'all work.

3. three

   Press the ball firmly into the lookout's backing. The rubber ball will demand to press itself firmly against the backing, particularly the screw notches. Apply house force per unit area as you move the ball confronting the bankroll and so the ball tin can establish a strong grip.^[five]

   • Apply pressure level to the watch in increments to avert accidentally damaging your sentry.

4. 4

   Twist the ball counterclockwise. Most watch models volition loosen when turned counterclockwise and tighten when turned in the opposite direction. As y'all turn the scout, the backing's screws should loosen. Twist rapidly and firmly to go along the condom brawl'south grip firm on the backing.^[6]

5. 5

   Utilise the brawl to loosen, but not remove, the bankroll. Once the backing is loose enough, y'all can apply your fingers to remove it entirely. Twist the bankroll with your fingers in the same counterclockwise movement until it and the screws come off. Keep the backing and screws in a safe identify so you do not lose them.^[7]

6. 6

   Use the safe ball once again to put the backing on afterwards. You'll want to make sure to secure the backing on tightly once you lot have washed whatsoever you needed to while removing it. Place the comprehend on your spotter's dorsum and printing the rubber ball firmly confronting information technology. Turn swiftly in a clockwise motion to tighten the backing upwards again.^[8]

   Advertising

1. 1

   Utilise scissors to loosen extremely tight backings. Condom balls may not provide enough grip if your backing is screwed on tightly plenty. Scissor tips are usually small plenty to achieve your watch'due south screws and twist them off as a specialized screwdriver would.

   • Cull a pair of pair of scissors with blunt tips to avoid injuring yourself if they skid.

2. 2

   Put the lookout man down on a firm, flat surface. Placing the watch on a apartment surface volition allow you to piece of work safely while handling the scissors. If your sentinel is expensive or fragile, ready a soft towel downward for the watch to rest on while y'all take out the screws.

3. 3

   Locate the watch's screw notches. These notches marking the locations of your screws. Open the handle of the scissors, then put 1 scissor tip into a spiral notch as you prepare to unscrew information technology. Make certain you identify the scissor end firmly inside the notch to avert losing your grip every bit you plough it.^[9]

4. 4

   Twist the notches in a counterclockwise movement. Just equally yous would with the prophylactic ball method, plough the scissors in a counterclockwise movement to loosen each screw. In one case y'all've removed your kickoff screw, echo this method on the remaining notches.^[x]

   • When you're gear up to put the backing on again, you will use the same method but twist in a clockwise movement.

5. five

   Try using a precision screwdriver equally an culling. If y'all can't get the hang of or would prefer not to utilise scissors, purchase a precision screwdriver from your local hardware store. Precision screwdrivers are commonly small enough to unscrew watch backings without having to purchase specialized tools.

   Advertizement

Add New Question

• Question

  How do I replace the bankroll cover of my watch? I pried information technology off with a thin bladed knife but it won't pop back together hands.

  

  Effort laying information technology upside down on a table and pushing down on the back evenly with a piece of woods.

• Question

  How do I remove the dorsum if there is no tab?

  

  Some watches accept screw-on case backs, which tin usually be identified past notches cutting into the case back or a money-like edge. In this instance, the proper tools are needed.

• Question

  How exercise I open the back of a watch that has been smashed in too far?

  

  In cases where the watch is damaged, you lot may need professional help to fix it. Contact a local jeweler or watch repair service to appraise what needs to be done.

• Question

  What practise I do if I exercise not accept that type of sentry?

  

  Y'all demand a watch opener tool set. Yous tin can purchase a mediocre set on eBay for about $12, simply it will work fine.

• Question

  What do I do if I tin't detect whatsoever notches or indentations on the back of my sentry to get the back off?

  

  In that case, I would recommend taking your scout to a jeweler or other specialist so y'all don't accidentally damage it.

• Question

  How to replace back cover?

  

  If the back cover is damaged, replacement options will vary depending on your watch model. Contact a local jeweler or picket repair service to assess your options.

• Question

  Should I stop my lookout when I'm not using it?

  

  I've stopped mine for a long fourth dimension, and the initial battery all the same worked fine after a couple of years of inactivity. So I'd wager it preserves bombardment life by stopping it when you aren't using it, as I haven't changed the battery yet in mine.

• Question

  How do I get the back off my Luv and Kush watch?

  

  If at that place aren't whatsoever dents or notches on the lookout man and yous cant use any of the tips to a higher place, then you would demand the proper tools.

• Question

  I take a Ninja Turtle watch from 2014, and I can't run across any notches or anything that would help me pry information technology off. Does this scout need proper tools?

  

  It is likely a pressure fit back. If then, this will crave some sort of case back opening tool. Likewise, you could try to utilize methods described in this folio.

Inquire a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

• Be careful when handling abrupt knives or screwdrivers to avert hurting yourself.

• If yous've tried each method and yous still can't get the backing open, visit a local jeweler to make up one's mind what your best choice is.

Cheers for submitting a tip for review!

Ad

Things Yous'll Need

• Blunt pair of scissors
• Rubberized ball
• Duct tape and tennis ball
• Razor bract (optional)
• Precision screwdriver (optional)
• Towel (optional)

Near This Article

Commodity Summary Ten

If y'all need to pry off a scout bankroll but don't have the proper tools, outset by turning your sentry over and locating the modest indentation along the edge, which is the hinge. Next, insert the edge of a razor bract or kitchen knife into the hinge opening, working slowly so y'all don't damage the watch. Then, lift the razor blade like a lever and apply even pressure to pry off the bankroll. For tips on how to pry off a particularly tight watch backing using a scissors, read on!

Did this summary help yous?

Thanks to all authors for creating a page that has been read 1,653,216 times.

Did this article help you lot?

taylorrenturem76.blogspot.com

Source: https://www.wikihow.com/Pry-off-a-Watch-Backing-Without-Proper-Tools

Share this post